Best Bluetooth Amplifier Board

Are you looking for the Best Bluetooth Amplifier Board in USA? Well, look no further. We have found the top 10 Best Bluetooth Amplifier Board that are most worth your time and money. From basic to Advance, we have it all covered for you!

Best Bluetooth Amplifier Board

WHDTS Bluetooth Audio Stereo Power Amplifier Board Module BLE5.0 Dual Stereo Output 50W+50W 5V~24V Bluetooth Receiver Module with Case DIY

$13.99  in stock
as of November 22, 2021 9:20 am

Features

  • 【Wide Work Voltage Range. Dual Stereo Output】: This Treble/Bass Adjustable Bluetooth Audio Amplifier Board Module's input voltage range is DC 5-24V. Work Current: >3A. Output power is 12Wx2, 20Wx2, 18Wx2, 30Wx2, 32Wx2, 38Wx2, 45Wx2, 50Wx2. NOTE: Input voltage must no more than 24V, otherwise the audio amplifier module will be damaged. Wide application for Modified Speaker, Amplifier Equipment, Car Bluetooth Device.
  • 【Multiple Type of Speakers】: You can directly connect this Bluetooth speaker amplifier board with wireless Bluetooth 5.0. And it's compatible with multiple kinds of speakers. Two channels 20W/30W/50W amplifier board work with various speakers (4-8 ohm), supporting Bluetooth stereo audio input AUX audio input.
  • 【Powerful Design】: The digital amplifier module is equipped with wiring blocks and DC 2.1mm socket which is compatible with most laptop's power port. Built-in filter capacitor makes it available to process the sound signal. Knob potentiometer design makes it convenient to adjust the power ON/OFF, V+/V-.
  • 【Protective Function】: The BT Amp is designed with acrylic protective shell, reverse connection protection, over-voltage protection, under-voltage protection, over-temperature protection, short-circuit protection. Self-recovery overheat protection.
  • 【No POP Sound】: There is no POP sound when power ON, skip song or pausing. Wide application for Modified speaker, Amplifier equipment, Car Bluetooth device.

200W Bluetooth Amplifier Board TPA3116,DAMGOO 100W+100W Audio Amp Board with LC Filter Technique,Dual Channel DC8-24V,Password Free Connect to Phone Quietly

$24.99  in stock
1 used from $22.33
Free shipping
as of November 22, 2021 9:20 am

Features

  • CHIP: DUAL TPA3116 HIFI Chip with AM Interference Suppression Function, 100W*2 Output Power
  • WIDE INPUT VOLTAGE RANGE: DC 9V-24V with 5.5 * 2.1mm Interface, Laptop Power Supply Is a Good Choice
  • BLUETOOTH & AUX INPUT:User Can Directly Connect with Wireless Bluetooth 5.0, or Choose the 3.5MM Headphone (Line in) Way
  • PROTECTIVE FUNCTION:Over-voltage Protection, Under-voltage Protection, Over-heat Protection, Short-circuit Protection, This means that the Bluetooth amplifier board is not easily damaged
  • TIP: adequate output power is required when the audio input is sufficient and the power supply voltage/current is sufficient, the relative power will be higher. Different impedance horns will have different output power.In the case of sufficient voltage and current, the larger the impedance horn, the smaller the relative sound power, please pay attention!

MakerHawk Mini Amplifier Board Bluetooth Amplifier 2.0 2X50W 5V-24V Audio Power Amplifier Module for Store Home Theater Speakers

$11.99  in stock
as of November 22, 2021 9:20 am

Features

  • [Bluetooth amplifier] High quality mini amplifier board. Bluetooth 5.0 version, the transmission efficiency is higher, the transmission distance is farther
  • [High Performance] Audio power amplifier module dual channel, max output power 2X50W. The capacitor 470uf35V guarantees the power storage and heat dissipation capacity, makes the power supply stable, and is equipped with a heatsink
  • [Protection Mechanism] With short-circuit protection and overheating protection to prevent total failure. In the event of an overload, the device reports the fault condition to the processor to protect itself from damage
  • [High Quality] It adopts copper DC connector and fence type terminal. It can withstand large current, no heat, no damage to the wire. Free DC head lead, compatible with the input power interface of this product, even if you don't have a DC head adapter or battery, it can be easily wired
  • [Application] The potentiometer adjusts the volume with a switch for easy control of the volume, making it ideal for DIY speakers. Widely used in car, home theater etc

Bluetooth 100W+100W Amplifier Board with Treble and Bass Control, DC 9-24V, BT and AUX Inputs, 2.0 Channel Stereo AMP Board for DIY Wireless Speakers, Password Free

$43.99
$31.99
 in stock
as of November 22, 2021 9:20 am

Features

  • DUAL TPA3116D2 HIFI Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, THD ≤0.1%. Wide Voltage Input DC: 12-24V;
  • Treble & Bass Control: If You Are Tired of The Inherent High& Low Bass, Why Not Try The High & Low Control Knob! This Will Make You Feel Like Being In A Movie Theater.;
  • Bluetooth and AUX Function: Bluetooth 5.0 version, Transmission Distance Is Farther. The Transmission Distance Can Reach 49 Feet In An Open Environment. If your Play Device Does Not Have Bluetooth, You Can Also Input Audio Signals Through The 3.5MM Headphone Plug.;
  • Safety Protection: This Amp Board Has Overheat Protection, Circuit Protection, Over-voltage and Under-voltage Protection;
  • 7 * 24 Hours After-sales Service: Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer.

DAMGOO Bluetooth 5.0 Amplifier Board,100w Audio Amp Board Dual Channel DC8-24V,Easy Installation and Password Free Connect to Phone Quietly

$16.99  in stock
as of November 22, 2021 9:20 am

Features

  • HIFI CHIP:XY-502B Adopt TPA3116D2(with AM Interference Suppression Function) Chips, With Excellent Sound Quality. It Ensures That Even With High Power Operation For A Long Time, THD Is Less Than 0.1%.
  • WIDE INPUT VOLTAGE: DC 9V-24V, Can Be Powered by 9V/12V/15V/18V/24V
  • TWO AUDIO INPUT WAYS:User Can Directly Connect with Wireless Bluetooth 5.0, or Choose the Headphone (Line in) Way
  • PROTECTIVE FUNCTION:This BT Amp Is Designed with Protective Case, Over-voltage Protection, Under-voltage Protection, Over-heat Protection, Short-circuit Protection
  • TIP: adequate output power is required when the audio input is sufficient and the power supply voltage/current is sufficient, the relative power will be higher. Different impedance horns will have different output power.In the case of sufficient voltage and current, the larger the impedance horn, the smaller the relative sound power, please pay attention!

DAMGOO Bluetooth Amplifier Board, 100W+100W Peak Output Power, 2.0 Channel DC:8-24V, Password Free Connect, BT 5.0 AMP Board for DIY Wireless Speakers Board

$17.99  in stock
as of November 22, 2021 9:20 am

Features

  • Output Power: 100w+100w Output Power, Wide Voltage Input: 5V-24V, Can Be Powered by 9V/12V/15V/19V/24V. Adapter speaker 4-8Ω (50w-150w)
  • Bluetooth 5.0: User Can Directly Connect with Wireless Bluetooth 5.0 without Password
  • Easy Installation and Short Start-up Sound: The Illustration Of Each Interface Is Printed On The Protective Plate, Making It Easy To Install Even Without Instructions. The Sound of The Amp Board To Start And Connect To Bluetooth Is Short Rather Than Not a Asian Woman's voice.
  • Protective Function:This BT Amp Is Designed with Protective Case, Over-heat Protection, Short-circuit Protection
  • Note: Please Use A Power Adapter With Sufficient Power To Connect The Amp Board, Otherwise The Sound Will Be Distorted. And Make Sure The AMP Board Is Away From The Wifi Signal.

Aideepen TDA7492P 50W+50W Audio Power Bluetooth Amplifier Board Dual Channel Wireless Digital Stereo Receiver AMP Board with 5.5x2.1mm 12V 2A AC Adapter and 1pair Male Female Jack Connector

$25.99  in stock
as of November 22, 2021 9:20 am

Features

  • POWERFUL 2x50W: Aideepen's 2 Channel Stereo Amplifier Board will let you enjoy wonderful quality stereo music and audio w/2x50W watts of power which can be used for multi speakers w/ 8 ohms impedance. Perfect for your for home or vehicle music streaming sound system
  • Upgraded Version: Model: AD-001, with better quality capacitor resistance, the sound is more stereo; Better performance heat dissipation; 4 mounting holes are made of gold-plated material, which is more beautiful. Blue and red optional. Equipped with Bluetooth wireless music streaming, the personal integrated digital audio receiver works w/ today’s phone devices with hassle-free receiver pairing
  • Attached 12V 2A AC Adapter: AC110-240V worldwide input voltage, more convenient to connect your home audio device. Please verify carefully that the DC Output (12V 2A) and connector Tip size 5.5x2.1mm match your original adapter before purchasing
  • Attached 1 pair 5.5x2.1mm plug connector: Female Jack-5.5mm x 2.1mm, Easier for camera installation, save time and more securer cable connection. Male jack--2.1 x 5.5mm Power Plug features one power connector end DC plug male to another end terminal, convenient for you to connect your amplifier board, led strip light, tape light or other devices
  • Package Included: (if you need help,please feel free to contact us) 1 x Aideepen Amplifier Board; 1 x AC Adapter, 1pair Male Female Jack Connector

Bluetooth Power Amplifier Board with Subwoofer 2.1 Channel 50W×2+100W, 12V-24V Audio Power Amplifier Module with Treble and Bass Control for DIY Bluetooth Audio and Store Home Theater

$28.98  in stock
2 new from $28.98
1 used from $27.53
Free shipping
as of November 22, 2021 9:20 am

Features

  • 【Bluetooth & 3.5mm AUX】 The ZK-MT21 power amplifier board uses Bluetooth 5.0, and its transmission distance can reach 49 feet (without obstruction). At the same time, this power amplifier board has a 3.5mm AUX audio input interface. No matter what kind of input method, you can always find a method that suits you.
  • 【Treble and bass adjustment】If you are tired of power amplifiers with only a single volume knob, then you feel right, because you have further requirements for audio. By adjusting the high and low frequency knobs of ZK-MT21, you can make the sound more layered and make the bass more shocking.
  • 【High compatibility】The DC adapters on the market (plug specification 5.5mm*2.1mm) basically can meet the needs of the ZK-MT21 Bluetooth power amplifier board. If your existing DC power plug is not 5.5mm*2.1mm, there is no The problem is because we have included a DC conversion plug in the product.
  • 【Protection function】ZK-MT21 Bluetooth power amplifier board has multiple protection mechanisms to ensure its safe operation. It has short-circuit protection, over-current, over-heat, and anti-reverse protection. When an overload occurs, the device reports the fault condition to the processor to protect itself from damage
  • 【7 * 24 Hours After-sales Service】 Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer

DAMGOO Bluetooth 50W+50W Stereo Audio Amplifier Board with Treble and Bass Control, Bluetooth and AUX Inputs, BT 5.0 AMP Board for DIY Wireless Speakers Board, Easy Installation and Password Free

$24.98  in stock
as of November 22, 2021 9:20 am

Features

  • TPA3116D2 HIFI Chip Solution: Stereo Dual-channel Output to Ensure Continuous Serial High-power Operation, THD ≤0.1%. Wide Voltage Input DC: 9-24V;
  • Treble & Bass Control: If You Are Tired of The Inherent High& Low Bass, Why Not Try The High & Low Control Knob! This Will Make You Feel Like Being In A Movie Theater.;
  • Bluetooth and AUX Function: Bluetooth 5.0 version, Transmission Distance Is Farther. The Transmission Distance Can Reach 49 Feet In An Open Environment. If your Play Device Does Not Have Bluetooth, You Can Also Input Audio Signals Through The 3.5MM Headphone Plug.;
  • Safety Protection: This Amp Board Has Overheat Protection, Circuit Protection, Over-voltage and Under-voltage Protection;
  • 7 * 24 Hours After-sales Service: Paying Attention To Customer Experience And Satisfying Customers Is Our Service Tenet. If You Have Any Questions About The Product, or The Product Has Quality Problems, Please Contact Us At Any Time, We Will Give You A 100% Satisfactory Answer.

Bluetooth Subwoofer Audio Amplifier Board 50W+50W+100W with Treble and Bass Control, Bluetooth and AUX Inputs, BT 5.0 Stereo AMP Board for DIY Speakers Board, Password Free

$33.98  in stock
as of November 22, 2021 9:20 am

Features

  • ▶【Subwoofer Audio Amplifier Board】 50W+50W+100W Bluetooth 5.0 wireless connection, Bluetooth+AUX audio input, 2.1 channel stereo output, just a little sound distortion. Note: When using AUX mode, please confirm that the Bluetooth connection of this module has been disconnected.
  • ▶【Treble and Bass Adjustment】 This digital Amp board with independent treble and bass adjustment buttons,you can directly adjust the treble and bass through the module, without using the player or speaker.
  • ▶【Perfect Sound Quality Experience】 The audio power subwoofer amplifier module with powerful chip, AM interference suppression function, shielding power inductance, low noise front stage operational amplifier, let you enjoy a more perfect sound quality experience.
  • ▶【With Protective Function】 This Bluetooth Amp module is designed with over-voltage protection, under-voltage protection, over-heat protection, short-circuit protection, with case to protective it.
  • ▶【Easy Installation and Use】 The illustration of each interface is printed on the protective plate, making it easy to install and use even without instructions. Small size: 4.72in*3.94in*0.7in, easy to carry.

Leave a Comment