Our Top 20 Best Nut Drivers list was created by The Man Post founder, Paul Crouch, to help users find products that are useful, affordable, and available. The list is updated every month.
Best Nut Drivers
Klein Tools 32807MAG 7-in-1 Nut Driver, Magnetic Driver has SAE Hex Nut Sizes 1/4 to 9/16-Inch, Cushion Grip Handle for Added Torque
$29.97 in stock
1 used from $28.47
- This Klein Screwdriver / Nut Driver allows for one-handed driving, with seven sizes in one tool
- Strong, Rare-Earth magnets (1/4-Inch, 5/16-Inch, 11/32-Inch, 3/8-Inch, 1/2-Inch) securely hold nuts and bolts
- Spring coil (7/16-Inch, 9/16-Inch) holds nuts and bolts in place without the use of magnets
- Hollow shafts (1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 9/16-Inch) for driving nuts deep onto bolts or threaded rod
- Heavy-duty handle and shaft exceed the torque performance of regular nut drivers
Klein Tools 647M Tool Set, Magnetic Nut Drivers Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2-Inch, 6-Inch Hollow Shafts, 7-Piece
1 used from $53.35
- Nut drivers' full hollow shafts (except 3/16-Inch [5 mm]) facilitate work on long bolt applications
- Rare-Earth magnetic tips on nut drivers hold fasteners in place
- Cushion-Grip handles for greater torque and comfort with color coded handle domes for easy identification
- Internal flanges provide solid, twist-resistant shaft anchor
- Made in USA
Klein Tools 631 Tool Set, Nut Driver Set w/Hex Nut Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16 and 1/2-Inch on 3-Inch Full Hollow Shaft, 7-Piece
- Tool Set has general-purpose selection of the most frequently used nut drivers
- Nut Drivers full hollow shafts facilitate work on long bolt applications with internal flanges that provide solid,twist-resistant shaft anchor
- Cushion Grip handles allow for greater torque and comfort
- Tip-Ident quickly identifies nut driver hex orientation and size by color coding the handle ends so you can easily engage the nut driver with the fastener
- Made in USA
14 Piece SAE and Metric Professional Automotive Nut Driver Set Color Coded Nonslip TPR Hand Grips and 3-inch Hollow Shaft
$37.00 in stock
- 14 piece SAE and metric professional automotive nut driver Set Color coded nonslip TPR hand grips and 3-inch hollow shaft
Klein Tools 635-6 Tool Set, Heavy Duty Magnetic Nut Drivers SAE Sizes 1/4, 5/16, 3/8, 7/16, 1/2, and 9/16-Inch Hex, 6-Inch, 6-Piece
- Nut Drivers with through-handle, full-hollow shaft for torquing hex nuts onto threaded rod of any length
- Driver handles with color coding for easy identification of different sizes
- Wrench assist for additional torque
- Rare-Earth magnetic tip holds nut in place while fastening
- Heavy duty handles and shafts exceed the torque performance of regular nut drivers
KC PROFESSIONAL 97297 Hollow-shaft Nut Driver Set, 7 Piece
- Package length: 20.32 cm
- Package width: 16.51 cm
- Package height: 2.54 cm
- Product Type: TOOLS
TLEEP 20 x Magnetic Power Nut Driver Set for Impact Drill, 65MM 1/4" Hex Head Drill Bit Set SAE & Metric Screwdriver Socket Set, Chrome Vanadium Steel Quick Change Chuck Socket Wrench Nut Setters
- [Convenient Magnetism, Sae and Metric, 20 Pieces Different Sizes' Nut Driver Set for Drill]- to meet your different needs. 10PCS impact nut driver set (Standard): 1/2", 7/16", 3/8", 11/32", 5/16", 5/16", 9/32", 1/4, 7/32", 7/32"; 10PCS Power Nuts Driver Drill Bit (Metric): 13mm, 12mm, 11mm, 10mm, 9mm, 8mm, 7mm, 6mm, 5.5mm, 5mm. Thumbs up!
- [65mm Customized Length, Longer Than The Regular Length, More Than 10 Years of Experience in Hardware Tool Production] fit Quick-Change Chucks and Any Drill or Driver, electric screwdriver, socket wrench, pneumatic impact wrench, rechargeable drill, screwgun, etc. Better for impact use and impact rated. Need a hex adapter to use it with a socket wrench. Widely used in household DIY, auto part, woodworking, professional machine repairing. Fit for: Dewalt drill, HVAC, Hitachi, etc.
- [52±2 HRC. Extraordinary Technology & Professional & Durability] - The nut driver set is made from forged and hard chrome vanadium steel, the hardness can reach 52±2 HRC; With the corrosion-resistant sandblasted finish to make it more durable. Great nut drivers, durable, easy to use.
- [Universal 1/4 Inch Hex Shanks, with Awesome Corrosion-Resistant Sandblasted Finish] - High quality, long lasting and durable. Each hex nut screwdriver bit is clearly marked so that you can find what you need quickly. The Metric version and standard version are both available. The good tool set will meet your expectations.
- [Convenient Storage - Losing The Nut Drivers? Not Anymore!] Nut driver bit set come with a storage organizer to keep the pieces together, easier for carrying and organized storage. PLEASE: EXCEPT FOR 7/32", 5MM, 5.5MM, THESE SIZES ARE TOO SMALL TO GET MAGNETIC. ALL OTHER MODELS ARE MAGNETIC.
Hollow Shaft 14 Piece Professional Heavy Duty Hex Nut Driver Set SAE and Metric
- 14 Piece Heavy Duty Hollow Shaft Metric and SAE Nut Driver Set--Overall Length of Each Nut Driver is 5.5" Long
- Drop Forged and Chrome Plated Also Color Coded for distinguishing Metric and SAE
- SAE Sizes Include: 3/16", 1/4", 5/16", 11/32", 3/8", 7/16", 1/2"
- Metric Sizes Include: 5, 6, 7, 9, 10, 11, 12
PANOVOS 14pcs Power Nuts Driver Drill Bit Tools Set Metric Socket Wrench Screw 1/4'' Driver Hex Keys
- No magnetic !!! 1/4" Shank fits most powered corded or cordless drills,Strong inner Hexagon sleeve
- Hex-Shank length: approx. 2.2cm, Shank diameter: 1/4 inch (6.35mm)
- Specifications：3/16(4.76mm),1/4(6.35mm),9/32(7.14mm),5/16(7.93mm),11/32(8.73mm),3/8(9.53mm),7/16(11.11mm) 5mm,5.5 mm,6mm,7mm,8mm,10mm,12mm
- It's widely used in household do some thing, auto parts, woodworking, professional machine repairing, etc.
- Package Included: 1 x 14pcs power Nuts Tools Driver Drill Bit Set Metric Socket Wrench Screw 1/4" Hex Drill nut driver set
DEWALT Screwdriver Bit Set with Nut Drivers, 71-Piece (DWMT73808)
- The screwdriver bit set comes with lockable stacking cases
- DEWALT bit set also comes with a durable transparent lid
- The driver bit set exceeds ANSI Specifications
- Vinyl Grip Multi Grip Bit Driver.
Capri Tools Kontour Nut Driver Set, 3-Inch Hollow Shaft, SAE, 7-Piece
- Forged from Chrome Vanadium steel to provide ultimate performance and durability, and equipped with full length 3 in. hollow shaft that lets you work on long bolt applications
- The Kontour handle is shaped to fit the curvature of your hand, giving you a powerful and ultra-comfortable grip
- The Kontour handle is covered in alternating soft and hard layers, in a hybrid pattern designed to strike the perfect balance between high speed turning and high torque transfer, giving you a sure grip while letting you quickly shift in between turns
- Anti-roll design helps the screwdriver say where you leave it and won't roll away. Hanging hole at the top of the handle lets you use standard hooks for organization and storage
- Set of 7 nut drivers in SAE hex sizes: 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, and 1/2 in
Klein Tools 646M Tool Set, Magnetic Nut Drivers Sizes 1/4 and 5/16-Inch, 6-Inch Shafts, 2-Piece
- Tool Set includes general purpose selection of the most frequently used nut drivers (Cat. Nos. 646-1/4M and 646-5/16M)
- Full-hollow shaft design with Rare-Earth magnetic tip facilitates work on bolt applications
- Handle end is color-coded for easy identification
- Internal flanges provide solid, twist-resistant shank anchor
- Made in USA
GEARWRENCH 16 Pc. Ratcheting Nutdriver Set, SAE/Metric - 8916D
- GearDriver uses a variety of interchangeable shafts and handles for improved access to hard-to-reach fasteners
- 45 tooth ratcheting handle provides 8° swing arc delivering added strength for tough applications
- Color coded Stripe to easily identify SAE from metric sizes
- Stamped part Number for quick identification
- Dual material handle offers a more comfortable grip and higher performance
ARES 70650 - 6-Piece SAE Magnetic Impact Nut Driver Bit Set - Impact Grade Nut Setters with Industrial Strength Magnets
- SET INCLUDES: This impact grade nut driver set includes 1/4-inch, 5/16-inch, 3/8-inch, 7/16-inch, 1/2-inch and 9/16-inch nut drivers with a handy storage rail so you'll never lose one of these drivers on the job.
- ITEM SPECIFICATIONS: These 6-inch-long magnetic nut drivers are made from impact grade Chrome Vanadium steel and Manganese Phosphate coating to help prevent rust and corrosion. These impact nut drivers have a 1/4-inch hex shank that fits any standard quick connect drill chuck and an extra strength magnet for superior fastener retention. These drivers are built to last!
- THE QUALITY YOU NEED: Whether you're working on racks, mounting panels, or gears, these magnetic nut drivers come through every time and snap right into your impact driver. They are full length, impact grade and help you reach where your fingers can’t.
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Magnetic Impact Nut Driver Set, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization.
Klein Tools 65064 Hex Head 2-in-1 Nut Driver, 1/4-Inch and 5/16-Inch
$15.27 in stock
- 1/4-Inch and 5/16-Inch six-point hex nut drivers
- Powerful magnets for maximum fastener-retention
- Solid build quality - feels like a conventional nut driver
- Color coded bands for easy identification
- Wrench-assist to help remove stubborn fasteners
TOOLEAGUE Magnetic Nut Driver Set for Impact Drill Cr-V Steel 1/4" Quick-Change Hex Shank 17 Piece Metric/SAE Screwdriver with Storage Bag
- High Quality: The impact driver bit is made of Cr-V steel, which has higher shock resistance and hardness. The surface is blackened by manganese phosphate, which has the ability to resist wear, oxidation and corrosion.
- STRONG MAGNETIC FORCE: The drill sockets powerful magnetizer design can strengthen the safety lock and hold of the drill bit during the application of nut and bolt fasteners. Each magnet is tightly installed, and the magnet is not allowed to fall.
- POWER NUT DRIVER BITS: metric magnetic nut driver set, metric: 6mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm. SAE: 1/4″,11/32″, 5/16″, 3/8″, 7/16″, 1/2″, 9/16″,( 1pc of each), Each mounter size is clearly engraved on the side for easy identification.Also includes 3 Pcs drill extension rods.
- QUICK-CHANGE: The nut setter master set is suitable for quick chucks and any drill or driver, electric screwdriver, socket wrench, pneumatic impact wrench, cordless electric drill, screw gun, etc.
- PACKAGE CONTENT:The Nut Driver Socket with a storage bag, which is convenient for storage and carrying. It is widely used in household DIY, auto parts, woodworking, professional machine repair, etc.
NEIKO 10068A Power Nut Driver | 20Pc Hex Nut Driver Set | 1/4" Hex Shank | SAE & Metric | 4-12mm & 5/32”-1/2” | High Torque CR-V Steel | Quick Change | 6 Point Socket Drill Bit Set | Nutsetter
$9.99 in stock
- [QUALITY]: Constructed of forged heat and treated chrome vanadium steel for high torque.
- [APPLICATION]: Power tool accessory designed to fasten bolts, metal and self tapping screws.
- [UNIVERSAL FIT]: Universal 1/4” hex shank for a variety of quick-change chucks, and drills.
- [INCLUDES]: Plastic organizer strips to store and carry around in your tool bag or tool box.
- [CONVENIENT SIZES]: Standard: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2 Inch; Metric: 4mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
Milwaukee 48-22-2407 7-Piece Nut Driver Set
$27.99 in stock
- 7Pc Nut Driver Set
- The product is easy to use and easy to handle
- The product is highly durable
Klein Tools 65160 Tool Set, Metric Nut Driver Set Sizes 5, 5.5, 6, 7, 8, 9, and 10 mm, 3-Inch Chrome-Plate Hollow Shafts, 7-Piece
$49.99 in stock
- Nut Drivers are standard length for most applications and fit over long bolts and studs
- Tool Set includes metric nut driver sizes 5, 5.5, 6, 7, 8, 9, and 10mm
- Internal flanges provide solid, twist-resistant shaft anchor
- Tip-Ident quickly identifies nut driver and size
- Made in USA
HORUSDY 15-Piece Magnetic Hex Nut Driver Set, 1/4" Hex Shank, Metric and SAE, Cr-V Steel
$19.99 in stock
- 1/4" magnetic nut setter can be used with an impact/drill bit driver or an inner hexagonal ratchet, which can firmly grasp the hexagonal nut and fasteners for easy installation or loosening/removal.
- Using industrial grade chromium vanadium steel structure, surface black phosphate coating, high hardness, high strength, high wear resistance, corrosion resistance.
- 8-Piece Metric size: 6mm, 7mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm.
- 7-Piece SAE size: 1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16".
- The leaflet design head fastener with rounded edges grabs the nut from the side rather than the corner to prevent peeling and extend the life.