Best Tiny Whoop Battery

Our Top 20 Best Tiny Whoop Battery list was created by The Man Post founder, Paul Crouch, to help users find products that are useful, affordable, and available. The list is updated every month.

Best Tiny Whoop Battery

GAONENG 6pcs 380mAh 60C 1S LiPo Battery 3.8V/4.35V LiHv Battery with JST-PH 2.0 Connector for UZ65 Tiny Whoop Micro FPV Racing Drone

$27.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • The ultra 380mAh 1S LiPo Battery for Tiny Whoop Blade Inductrix(Need PH2.0 Upgrade)Quadcopter.
  • Battery Size:62*11*7.0mm, Weight: 8g/per unit, Connector: PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
  • The weight of the 380mAh 1S Lipo battery is 0.7g heavier than the 300mAh battery, better performance than it.
  • Newly developed chemistry 380mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation.
  • Note: Don't over-charge, or over-discharge batteries. Do not use inferior chargers. Don't put it beside the high temperature condition. Don't use high current charging frequently.

4pcs 230mAh 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector

$19.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation
  • Capacity: Standard voltage (4.2v, 230mah)or High voltage (4.35v, 250ish mah)
  • Tiny Whoop Blade inductrix future choice of battery
  • The connector plug: JST-PH2.0 AKA High current ultra micro, Powerwhoop , mCPX
  • Dimension: 54mm * 12.5mm * 6mm, Weight: 6.3g/per unit

4pcs 250mAh 1S LiPo Battery 3.7V 30C Blade Inductrix Battery Micro JST 1.25 Connector for Kingkong Tiny 6 Tiny Whoop FPV Racing Drone

$24.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • [Dimension] - High capacity of 250mAh 30C, Small size of 55x11x5mm, is the great choice of Tiny Whoop FPV Racing Drone
  • [Upgraded Version] - 30c Discharge built to fit perfectly in your Blade Inductrix, Tiny Whoop.This LiPo Battery gives an increase in performance, provide you more punch and longer flight times and only weight 6.6g per unit
  • [Durable] - Equipped with High current ultra micro, it's sturdy and can deliver the right voltage consistently without breaking over time
  • [Wide application] - This LiPo Battery is great for brushed whoop motors of any size and brushless 1s and 2s whoops as well. Like snapper 7, betafpv6s, mobula 7, Beta65s, beta65x
  • [Note] - Don't over-charge, or over-discharge batteries. Do not use inferior chargers. Don't put it beside the high temperature condition. Don't use high current charging frequently.If the battery cannot be used, please contact us immediately! !

Gaoneng 6pcs 380mAh HV 1S Lipo Battery FPV Battery 60C/120C 3.8V with PH 2.0 Powerwhoop Connector for UZ65 US65 Tiny Whoop Drone Blade Inductrix

$27.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • High capacity of 380mah 60C, Small size of 62 * 11 * 7mm, is the great choice of Tiny Whoop Blade inductrix
  • The battery connector is PH 2.0 AKA High current ultra micro, Powerwhoop, mCPX
  • This 380mah HV 1S Lipo Battery gives an increase in performance, provide you more punch and longer flight times and only weight 8g per unit
  • GAONENG 380mah Battery is Great for brushed whoop motors of any size and brushless 1s and 2s whoops as well. Like snapper 7, betafpv6s, mobula 7, Beta65s, beta65x
  • Caution: As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water

10pcs Upgraded Tiny Whoop JST-PH 2.0 Male and Female Connector Cable for Battery JJRC H36 H67 Blade Inductrix E010 E013

$7.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • ★This is the male and female connector cable,
  • ★Upgrade JST-PH 2.0 connector, the pins will not loose easily
  • ★Must have for HV batteries and high performance
  • ★80mm length/per unit. 22AWG soft silicone wire
  • ★Suitable for tiny whoop like JRC H36 H67 Upgrading Blade Inductrix, E010 E013, and KingKong Tiny drone

BETAFPV 8pcs BT2.0 300mAh 1S Battery 4.35V 30C/60C FPV Lipo with 1.0mm Banana Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Cetus FPV Kit Meteor65 Micro Whoop Drone

$38.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • 【9A Continuous current】BETAFPV exclusive designed BT2.0 Connector AKA 1.0mm Banana connector which can support 9A continuous current and 15A burst while the PH2.0 connector is just support 4.5A continuous current. With this 300mAh 1S BT2.0 battery, all 1S brushless drone will gain powerful and perform perfectly
  • 【Discharge Rate】The discharge of the BT2.0 300mAh 1S lipo is improved a lot that the voltage drops more slowly, so pilots can enjoy more flight time without disturb of low voltage warning by solving the problem of voltage sag
  • 【1.0mm Banana Connector】1.0mm Banana Connector is more durable in terms of fit and conductivity than crimped pin. Highly recommend to use our newest BT2.0 connector to get the best performance from this BT2.0 300mAh 1s battery
  • 【Flight Time】Discharge curve is higher than PH2.0 battery which means it can discharge more current in the same capacity and provide more power. You can get 2mins flight time in full throttle on Meteor65
  • 【Extra Adapter Cable】Pilots can charge BT2.0 battery by PH2.0 charger with BT2.0-PH2.0 adapter cable(NOT INCLUDED), no need to buy additional BT2.0 charger. But we also have BT2.0 Battery Tester & charger for your need

TATTU 5pcs 300mAh 1S Battery 3.8V 75C FPV Lipo Battery with PH2.0 Plug Connector for FPV Tiny Whoop 1S Brushless Whoop Drone

$26.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • TATTU 1S 300mAh battery, simple design, more flight time.safe, high-quality, bring you a higher-speed flight experience.
  • The TATTU 300mah 1s lipo uses JST-PH2.0 plug, weight is 9g with the larger capacity of 75C.
  • 300mah 75C large capacity, small size of 63.5*11*6.6mm, it is the best choice for Tiny Whoop.
  • Note: As an FPV battery, do not overcharge or overdischarge the battery. Do not place in high temperature conditions. Don't throw it into the fire. Don't throw it into the water.
  • If you have any questions or need any assistance, please feel free to contact us

Hobbypark Tiny Whoop JST-PH 2.0 Connector Male & Female Cable for RC Battery JJRC H36 H67 Blade Inductrix E010 E013 (10-Pack)

$6.38  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • ✔Package include: 5x Male & 5x Female (come with 2x Battery Straps)
  • ✔Upgrade JST-PH 2.0 connector, the pins will not loose easily
  • ✔Approx 100mm length/per unit. 24AWG soft silicone wire. Must have for HV batteries and high performance
  • ✔Compatible with tiny whoop like JRC H36 H67 Upgrading Blade Inductrix, E010 E013, and KingKong Tiny drone
  • ✔100% New, Genuine HobbyPark RC Products,Exquisite workmanship & Durable,Buy with Confidence,Friendly Customer Service.

iFlight 5pcs Fullsend 300mah HV 40C 1S Lipo Battery with JST-PH 2.0 Connector for 60-80mm Tiny Whoop Drone

$27.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • iFlight new 1s lipo battery- Fullsend 300mah 40C lipo battery.
  • Advanced battery technology, doubles your device's performance time.
  • very light weight and very compact size.
  • Reliable power for FPV tiny whoop quads.
  • Long shape of this battery makes it works best on Alpha A65 Tiny Whoop drone.

BETAFPV 4pcs BT2.0 450mAh 1S Battery 4.35V 30C/60C FPV Lipo with BT2.0 Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Like Meteor75 Cetus Pro FPV Kit HX115 ELRS

$30.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • 【1.0mm Banana Connector】BT2.0 connector AKA 1.0mm Banana Connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connector
  • 【Discharge Rate】By solving the problem of voltage sag, the discharge of the 450mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning
  • 【High efficiency】BT2.0 450mAh 1S 30C Battery has stable current/voltage output and high efficiency. All 1S brushless drones will gain powerful and perfect performance with it
  • 【More durable】Compared with the PH2.0 crimped pins, BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power
  • 【High quality】High-end technology to guarantee high quality and consistent performance. If any problem with our product, please feel free to contact us.

iFlight 5pcs RC LiPo Battery Straps 10x100mm Rubberized Straps Non-Slip for Tiny Whoop Quadcopters Indoor Micro FPV Racing Drone (Black)

$7.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • Micro battery strap perfect for 1-3S tiny whoop brushless FPV racing drone like CineBee 75HD Whoop
  • This battery strap is rubberized on the side facing the lipo which ensures the lipo can't slip out
  • Strong self gripping, great for secure your lipo battery and enable a quick lipo change
  • Mini strap perfect for keeping wires tidy and clean and, like computer cables, mobile phone cables, USB cables et, all kinds of cables
  • These "Small" size straps are 100mm long and 10mm wide, pack of 5 pieces

AOK-041 1S LiPo Battery Voltage Checker Tester for Tiny Whoop Blade Inductrix Quadcopter with Micro JST 1.25 JST-PH 2.0 Micro Losi and JST Connector

$12.99
$11.99
 in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • Support four standard micro UAV battery interface, plug and check, dimensions: 43x23x15mm, weight: 10g
  • 0.36 inches red digital tube display, display battery voltage, battery voltage detection accuracy is accurate to 10mV
  • Supporting ports JST(2.54mm), MOLEX(2.0mm), mCPX(2.0mm), MCX(1.25mm)
  • Support lithium battery LiFe(3.3/3.65V), LiPo (3.7/4.20V),Li-Hv(3.8/4.35V)
  • Four battery interfaces support battery polarity reverse connection protection, four battery interfaces are supported LiFe,LiPo,LiHv

4pcs 520mAh 1S LiPo Battery 80C 3.8V HV LiHv Battery JST-PH 2.0 PowerWhoop mCPX Connector Upgraded for Inductrix FPV Plus EMAX Tinyhawk Micro FPV Racing Drone xt60 for Drone

$21.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • Upgrade 520mAh 1S battery with the connector of JST-PH 2.0 AKA Powerwhoop mCPX is customed for larger brushed whoop drones like EMAX Tinyhawk Brushless Micro Indoor Racing Drone Whoop Inductrix FPV Plus, Eachine trashcan, BETAFPV Beta75 brushed drone, Beta75 Pro brushless drone or Kingkong Tiny 7
  • This FPV 1S battery's discharge rate is 80C, Small size of 64 * 15 * 6 mm, Light weight of 13.42g/pc, you can get a long flight time and more power while staying at a suitable weight
  • The weight of the 520mAh 1S Lipo battery is 13.42g heavier than the 450mAh battery, better performance than it
  • Newly developed chemistry 520mAh 1S Lipo Battery, high voltage gets longer flight time and safer charging situation
  • Note: Don't over-charge, or over-discharge batteries. Do not use inferior chargers. Don't put it beside the high temperature condition. Don't use high current charging frequently.

HobbyFly 1s Lipo Battery Series Charging Board Blade Inductrix Ultra Micro JST-PH Connect Plate mCX mCPX for Tiny Whoop Charger Board

$22.49  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • New design charging solution for 1S lipo series charging board ,better than the parallel board;max charge current up to 4A
  • This board is without voltage deviaion limit between batteries;but the parallel board has voltage deviation limited(less than 0.1V deviation between batteries)
  • This board is more safety with series connection and better storage your batteries at the same time;
  • It can charge battery from one piece to 6 pieces at the same time only swtich the switches per your batteries quanlity.
  • It has tow type main charge plugs to meet almost lipo balance chargers(Banana connetor and XT60 connector).

Tattu 220mAh 3.7V 45C 1S LiPo Battery with JST 2.0 Plug for Micro Quads Tiny Whoop Blade FPV Racing Drone(5 Packs)

$25.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • Tattu 3.7V 220mAh Lipo battery Specification:Battery Voltage:3.7V;Configuration:1S1P;Capacity:220mAh;Discharge:45C;Plug: JST2.0 Plug.
  • Dimensions: Tattu 220mAh 1S Lipo battery dimensions is: 55*13*6mm/2.17*0.51*0.24inch; Approx Weight:6g/0.21oz.
  • High Performance: Tattu 1S 220mAh Lipo battery with 45C discharge rate hardcase offers high power and very long time for your RC Model.
  • Application: Tattu 1S 220mAh Lipo battery specially compatible with micro quads such as Blade Inductrix FPV, Blade Inductrix FPV Pro and horizon inductrix. Can be charged to 4.35v, Max 240mAh.
  • What you get: The Tattu battery comes with a 60 days money back and a 18 months warranty and with 24 hours friendly customer service. Please enter “YOU ORDER” to contact us directly if you have any problems with our product.

12Pcs Upgraded Tiny Whoop JST-PH 2.0 Male and Female Connector Cable for Battery JJRC H36 H67 Blade Inductrix E010 E013

$7.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • 6 pairs 51005 2-pin connector male&female wire.
  • Upgrade JST-PH 2.0 connector, the pins will not loose easily
  • Suitable for many helicopter airplance boat car controller.
  • 75mm length/per unit. 26AWG soft rubber wire
  • Suitable for tiny whoop like JRC H36 H67 Upgrading Blade Inductrix, E010 E013, and KingKong Tiny drone

AKK 1S LiPo LiHV Battery Charge Board Micro JST 1.25 and JST-PH 2.0 2-6S Input LiPo Battery Drone Charger for Blade Inductrix Tiny Whoop

$14.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • XT60 2S-6S LiPo or DC 12V/3A adapter
  • LED indicator clearly shows your batteries charging status
  • Support LiPo and LiHV batteries by a voltage switch: 4.2V for LiPo, 4.35V for LiHV
  • 6 independent charging ports: 0.2/0.6A & 4.2/4.35V swichable for each set of port.
  • Output connectors: Micro JST 1.25, JST-PH 2.0 (and Micro Losi and JST by the cables), compatible with most batteries.

1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

$9.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • ONLY support LiPo 3.7V/4.20V 1S battery
  • Support 0.2A/0.6A charge current by switch button ( Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2)
  • USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above
  • Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery)
  • The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.

Makerfire Micro FPV Racing Drone with FPV Goggles 5.8G 40CH 1000TVL Camera RTF Tiny Whoop Mini FPV Quadcopter for Beginners,Altitude Hold, One Key Return, Headless Mode Armor Blue Shark

$115.99
$109.99
 in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • 【FPV Goggles】As the first set of drone equipment for beginners, micro drone is specially equipped with FPV goggles. FPV goggles paired with 1000TVL M7 lens 120° FOV H170° Wide angle HD camera, take you to fly with the first angle of view, allowing you to closely experience eye to eye with bird on high place
  • 【Special Shape】FPV drone body adopt the shape of blue shark, which is our original design. Shark drone is your unique unmanned drone device. If you still considering what gifts to buy for your friend and family member on Christmas/birthday ? FPV shark drone is definitely a gift that wins screams
  • 【Fun Function】As a racing drone can easily complete a 360° flip flight, and complete active of the drilling circle indoors, and show your wonderful drone performances at family gatherings, which can get admiration and applause. Racing drone has three speeds to bring you different happy
  • 【Easy to Control】Novices will creat many accidents when use drone firstly. In order to simplify the operation, drones with cameras have a preset headless mode/one-key start/landing/return safety mechanism. Children and beginners can use it easily(It is best to have a certain flight foundation for better stable control). Altitude Hold can keep FPV drone camera at a certain height, which makes the camera drone easy to control and take photos or videos
  • 【Safe and Durable】360° All-round collision ring both reduce the damage caused by the impact of the flight and moreover also prevent the rapid rotation of the propeller scrastch hand. Provide strong safety support for indoor

Upgrade 1S LiPo Battery USB 3.8V/4.35V Charger 6 Channel 1S LiHV Charger for EMAX Tinyhawk Blade Inductrix Tiny Whoop Inductrix FPV Plus Battery Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

$10.99  in stock
Amazon.com
as of June 9, 2022 9:04 pm

Features

  • ONLY support LiHV 3.8V/4.35V 1S battery, not for 3.7V/4.20V 1S LiPo battery
  • Support 0.2A/0.6A charge current by switch button ( Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2)
  • USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above
  • Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery)
  • The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.

Similar Posts

Leave a Reply

Your email address will not be published.